HUTA BANKOWA Sp. z o.o.

41-300 Dąbrowa Górnicza

ul. Sobieskiego 24

tel. +48 32 295 74 00 – centrala

fax +48 32 295 76 13

e-mail: info@hutabankowa.pl

www.hutabankowa.pl

 

 

 

Huta Bankowa Sp. z o.o. is a dynamically developing company with a tradition of more than 180 years. We are a leading producer of long products such as round bars, billets, blooms, bulb flats, angles as well as forged and rolled tyres and rings. As early as 1898 Huta Bankowa commenced the production of railway tyres. For nearly 100 years tyres for normal gauge, narrow gauge and tramway wheel sets were made by means of conventional forging at the hammer forging department.

 

 

In 1996 this department discontinued its operation and was replaced by the most cutting edge in Europe and the only in Poland forged and rolled rings and tyres production department. The department is equipped with a fully automated roll forming line and the computer controlled production process makes it possible to produce items with highly repeatable dimensions. The roll forming line is supplemented by a tempering heat treatment line and an ultrasonic testing station. This enables us to continuously expand our offer and the highly flexible production line facilitates making of small lots of many non-standard products.

 

 

In 1996 this department discontinued its operation and was replaced by the most cutting edge in Europe and the only in Poland forged and rolled rings and tyres production department. The department is equipped with a fully automated roll forming line and the computer controlled production process makes it possible to produce items with highly repeatable dimensions. The roll forming line is supplemented by a tempering heat treatment line and an ultrasonic testing station. This enables us to continuously expand our offer and the highly flexible production line facilitates making of small lots of many non-standard products.

 

 

The buyers of tyres for rail wheel sets produced by the company, apart from all Polish carriers, are also Egyptian, Thai, Russian, Bulgarian, Romanian, Hungarian and Ukrainian companies. We hold acceptance certificates for the manufacture of tyres according to UIC, BS, GOST, DSTU or MAV. 

 

As a standard we also manufacture tramway tyres for the needs of the Polish market, where we provide 100% coverage of the requirement, and we strictly cooperate with Germany, Romania, Hungary and the Balkan States.

 

 

Our offer includes:

- 850-1255 mm rough wheel tyres;

- 400-750 mm rough tramway wheel tyres;

- 280-3600 mm rolled and forged rings; height 35-560 mm, unit weight 30-2500 kg.

 

Our products are delivered rough, normalised, quenched and tempered. Acceptance tests are performed according to specifications of appropriate standards as determined by the Quality Control Service of Huta Bankowa, i.e. UDT, TÜV PRS, LRS, GL, DNV, BV, and ABS. In addition, we offer you a full selection of sizes and grades of railway and tramway axles forged at the swaging machines department equipped with an open die forging press (20MN) and a heat treatment line with a polymer quenching station. We can supply a wide range of forged products – starting from forged bars with a diameter of 30 ÷ 650 mm and the maximum unit weight of 10 tonnes/unit.

Wersja do druku Wersja do druku | Mapa witryny
© Całość praw autorskich - Antoni Bochen, Filip Wiśniewski